Kildare Log Cabin 4m x 4m

Delivered in flat pack to your door. You will need tools and carpentry skills to assemble the cabin. There is no structural warranty provided for self builds.

Built by our professional log cabin builders with years of experience in carpentry and log cabin building. 10 years structural warranty included for externally insulated log cabins and 2 years warranty for single skin log cabins.

Client guarantees level foundation to our specifications. Please contact us to get specifications for your log cabin foundation.

This consists of a pressure treated timber frame, covered with damp proof membrane & mounted on stilts. These are positioned on concrete block pads, set in a meter grid formation and cemented in place to avoid lateral or vertical movement. A standard height step, the width of the door (or the opening of the veranda) and a cover up around the base are included. If located on a flat surface, the building will be raised approximately 20cm off the ground. If located on a slope, it may be raised higher, which can increase the cost.

Only advisable for storage units, not suitable for residential log cabins or home offices. Buildings with uninsulated walls are inefficient to heat and are not protected by pressure treated cladding, decreasing the longevity of the building. This results in increased heating & maintenance costs over the lifespan of the building. Uninsulated walls get only two years structural warranty.

External insulation consists of 100mm insulation + breathable damp proof membrane + 25mm ventilated facade + 19mm pressure treated ship-lap cladding. This the highest standard option, the structural wall is never exposed to the elements as the pressure treated cladding protects the building, increasing longevity and lowering maintenance costs. This comes with a ten-year structural warranty.

16mm Argon gas filled, toughened safety glazing. They have simple locking mechanisms (single latch locking), non- adjustable hinges. Only suitable for storage purposes.

24mm Argon gas filled, toughened safety glazing, thicker frames & premium locking mechanisms, 3-point locks on the windows, 5-point locks on external doors. Superior flag hinges (fully adjustable) with great insulating properties.

2 x double sockets, pendant light, switch, 20m mains cable with connection to the house.

No electrical package. The client needs to arrange their own electrician to be on site as required during the build. If client’s electrician is not on site, the first fix will be wall-mounted and covered with trunking.

Our professional painting contractor will perform following works on your cabin: 1. Remove window/door hardware, seals, and hinges 2. Remove gutters/downpipes and roof flashings to paint the cabin 3. Fill screw, nail holes on the windows/doors (architraves and frames) 4. Sand windows/doors fully 5. Apply caulk to open joints on the windows/doors including frames (only prior to painting, not staining) 6. Silicone seal open joints on the walls, facias, window and door frames (externally) 7. Spot prime knots with oil-based primer (only prior to painting, not staining) 8. Fill knots with linseed putty.

Our professional painting contractor will perform following works on your cabin: 1. Remove window/door hardware, seals, and hinges 2. Fill screw, nail holes on the windows/doors (architraves and frames) 3. Sand windows/doors fully 4. Apply caulk to open joints on the windows/doors including frames (only prior to painting, not staining) 5. Spot prime knots with oil-based primer (only prior to painting, not staining) 8. Fill knots with linseed putty

Bundle discount. Includes everything from external and internal.

Client is responsible to paint the log cabin within 4 weeks of completion as per warranty agreement.